1 Answer
Things You'll Need
Wheel blocks
Bucket
Socket wrench
Clean rag
Solvent
Liquid gasket
Torque wrench
5 to 7 qt. of motor oil
Instructions
1
Park the GMC Sierra on a level surface and set the parking brake. Be sure to block the rear wheels to keep them from rolling.
2
Disconnect the battery cables and remove the oil dipstick, flywheel cover, oil cooler guides, front driveshaft. Unhook the exhaust pipes and remove the front engine mount bolts.
3
Put a bucket under the oil pan and remove the drain plug with a socket wrench. Let the oil drain into the bucket, and when it's finished draining, put the drain plug back on. Be sure not to overtighten the drain plug.
4
Loosen the oil pan bolts and take off the oil pan. Clean off the old gasket, making sure all traces have been removed. Wipe out the oil pan with a clean rag and clean the mating surface with solvent.
5
Apply a bead of liquid gasket to the mating surface and replace the oil pan while the liquid gasket is still wet. Torque the bolts according to specifications in the manual.
6
Reattach the engine mounting through nut and bolt, oil cooler guides and dipstick. Reconnect the exhaust pipe to the manifold, replace the flywheel cover and reconnect the battery cables.
7
Refill the engine with about 5 qt. of motor oil. Start the engine and then recheck the oil with a dipstick, adding enough oil to bring it to the full level. 2000 Jeep Cherokees require between 5 and 7 qt. of oil, depending on the size of the motor.
Read more: How to Replace the Oil Pan Gasket in a GMC Sierra | eHow.com http://www.ehow.com/how_4506389_replace-oil-pan-gasket-gmc.html#ixzz2KieOTn5x
11 years ago. Rating: 0 | |