1 Answer

Connect scan tool. Check monitor status.STEP 2: Start engine. Idle at least 90 seconds.STEP 3: Drive 3 minutes in D (OD ON), A/C ON, 1700-1900 rpm. Vary road speed.STEP 4: Drive at 55-70 mph in D (OD ON) for 90 second, 2000-3000 rpm. .STEP 5: Turn ignition OFF for 10 seconds, but not more than 5 minutes.STEP 6: Start engine. Cruise 3 minutes at 50-60 mph, D (OD OFF), engine speed > 3000 rpm. Do not decelerate more than 3 consecutive seconds.STEP 7: Cruise at 53-58 mph for 3 minutes, D (OD ON), A/C ON. Maintain 2200-2300 rpm. Use cruise control; keep accelerator as steady as possible.STEP 8: Turn OD OFF. Completely release accelerator for more than 5 seconds without braking. Idle 1 minute.STEP 9: Drive 2 minutes in 2, 3000 rpm, A/C OFF. Accelerate to 34 mph; decelerate to 28 mph; accelerate to 34 mph. Do not completely release accelerator.STEP 10: Idle 1 minute.STEP 11: Cruise at 31-44 mph for 2 minutes, D (OD OFF), A/C OFF. Use cruise control; keep accelerator as steady as possible.STEP 12: Stop. Turn ignition OFF then back ON. Repeat STEPS 3-5. Turn ignition OFF. Add 4 gallons of fuel. Start engine. Immediately repeat STEPS 7-12.