skip01
My cement mixer 240v supply lead has been pulled out of the connection box.
THE MAKER OF THE MOTOR IS "POWERFLO" AND IS 1/2 HP SINGLE PHASE WITH A ----CURRENT COIL RELAY---- AND A 5 MFD CAPACITOR. ONE WINDING WITH .5 OHMS RESISTANCE AND BLACK LEADS. THE OTHER HAS THREE LEADS:- RED, GREEN, AND YELLOW WITH RESISTANCES AS FOLLOWS:- R/Y = 43.7 OHMS, R/G = 29.4 OHMS, G/y = 14.9 OHMS TOGETHER WITH DTDC MAINS 6 PIN TOGGLE SWITCH. MY PROBLEM? I NEED CIRCUIT DIAGRAM TO RE-WIRE. hope this is a little clearer IF ANYONE CAN "HELP" EMAIL ME ON o0joe@tiscali.co.uk
1 Answer
Colleen
We are a general question and answer forum. We have no cement mixer mechanics here. Please call a heavy equipment mechanic.
| 12 years ago. Rating: 1 | |
You should have made it clear with your first answer that this is not the correct site for technical questions.
What i need is an Electrician not a Mechanic.
What i need is an Electrician not a Mechanic.
This was my first answer to you and it remains the same >> Contact Powerflo > http://powerflo.com/
Now go contact them or an electrician.
Now go contact them or an electrician.
Top contributors in Appliances category
Unanswered Questions
bxtayhaiduong
Answers: 0
Views: 2
Rating: 0
pkwindev
Answers: 0
Views: 7
Rating: 0
bongdaluukcom
Answers: 0
Views: 7
Rating: 0
bongdaluukcom
Answers: 0
Views: 4
Rating: 0
i9bet01live
Answers: 0
Views: 5
Rating: 0
Yarkam Live
Answers: 0
Views: 11
Rating: 0
Cuevana2 kim
Answers: 0
Views: 13
Rating: 0
go88jolieinnyc
> More questions...
Answers: 0
Views: 7
Rating: 0
You've been replied to four times now, three times today.
This is the ONLY information that could be found on the web.
http://www.jwhire.ie/docs/manual/E11005.pdf